NATURE50 INJECTION PELLET
LABORTORY VALUES
Hanf / PP (mean values of trials)
| Dart impact strength +23℃ | 27,80 kJ / ㎡ |
| Dart impact strength -30℃ | 23,80 kJ / ㎡ |
| Desnsity | 1,04 |
| E-Modul | 3000Mpa |
| Temsile strength | 25,00Mpa |
| Breaking elongation | 3,20% |
| Temsile strength | 25,00Mpa |
| Holding force for screws (required > 150N) |
365N |
| Smell (2h by 80℃ in glass bottle) required < 3 | 2 |
| Shrinkage | 0,26% |
| Combustion behaviour | GS 97038 Set point : < 100 mm / min |
| i .O actual value | 12 mm / min |
DENSITY
| Hemp / PP | 1.04kg / liter |
PROCESS PARAMETER
| Hemp / PP | Extrunder
Hot nunner |
Last zone until 175 ℃ 175℃ / 180℃ 30℃ -80℃ |
| Cycle time | identical to PC ABS GF 20 | |
| Special | manual feeding for Pellets to Extrudor | |
| Drying | 80℃ for 4h (one bag; 25kg) | |
| For reducing smell after injection at 120℃ for 2h | ||
Nature 50 HEMP Fiber 50%, PP 46%, PEWAX 4% – is a pellet for injection molding. Compared to the molded product PC ABS GF 20, it is possible to reduce weight by up to 20%, and it has equivalent mechanical properties in terms of strength, shrinkage factor, etc… Its surface has a unique pattern and looks distinctively luxurious.
* Please contact us for detailed information about Injection Molding,